automatic motor winding machine

Horizontal Servo Single Side Lacing Machine For Stator SMT-DW300​ (1) Main Technical Information Model DW300 Stack height 100 - 260mm Stator I.D 110-210mm Stator O.D ≤ 301mm Height of Overhang ≤50mm Laccing mode Slot by slot / interval slot/Fancy lacing Lacing speed 8-48 slot Power supply 380v/50...

Motor Winding Equipment Explosion - Proof Motor Stator and Rotor Assembly Machine 1. We have been approved by ISO 9001 certificate and manage the factory thoroughly according to the management system. 2. The production and marketing system not only improves the working efficiency but also assures ...

Motor Stator Servo Double Side Coil Lacing Machine Motor Production Machine SMT - DB160 Each lacing machine is PLC controlled with an inverter drive and can be fully programmed to suit different stator slot configurations. Stator support tooling is very quick to changeover between different stator ...

Generator Stator Coil Forming Machine / Automatic Stator Forming Machine The machine is suitable for forming up the small to medium size stator coil; the operator put the on left side roller to form up inner side of coil, then put the stator on right side formiug mould to finally form up height, ...

Induction Motor Stator Coil Double Sides Lacing Machine / Lacing Machine SMT - BZ160 This machine is consist of machine body, needle, nozzle rotating part, needle fore and back movement,nozzle swing part, needle up and down movement part, stator indexing part,thread feeding,thread cutting part. (1) ...

Stator End Turns Head Lacing Machine with Vertical Structure SMT - DB100 It's equipped with single lacing needle, which is suitable for production of different stators with small output. (1) Main Technical Parameters Model SMT-DB100 Stack height 10~100mm Stator I.D Φ35~ Φ110mm Stator O.D ≤Φ160mm ...

Motor Stator Slot Winding / Coil Inserting Machine ( Servo / Horizontal ) SMT - K90 This type of stator coil inserting machine can insert coil and wedge or coil and wedge in the mid of slot into stator at a time; wedge feeding is to be done bt stepping motor,and coil and wedge inserting is by servo ...

Coil Winding Machine Wire diameter 0.4-1.5mm ISO / SGS Audit Application: It is suitable for stators applicated in single phase motor, three phase motor, compressor motor, starter motor, washing machine motor, air condiction ect. Information needed for stator winding inserting machine inquiry It ...

Electric Induction Motor Automatic Winding inserting Drift Forming System 1.Machines offter automatic linear stator handling and simultaneous forming of both and turns 2. Quick, no hand tools, complete lamination tooling changeover . 3. All electric and pneumatic operation with no hydralics ( ...