motor coil winding insertion tool

Stator coil shaping machine middle forming machine Adopt horizontal structure, pneumatic system as main power; stator with same slot width and internal diameter can share one tooling, stroke of both ends of expanding blades is synchronous, no need two times expending, and expending blade stroke can be adjusted as per requirement; footswitch controls on/off, easy operation, and no damage to wedge, insulation paper and coil, wedge is still at right position after expending. (1)

Induction Motor Stator Coil Horizontal Single Side Lacing Machine SMT-DW300 This machine is used to bind the engine stator coil, applicable for various wires binding methods, and equipped with tension controller to adjust the tightness degree of binding wires. (1) Main Technical Information Model DW300 Stack height 100 - 260mm Stator I.D 110-210mm Stator O.D ≤ 301mm Height of Overhang ≤50mm Laccing mode Slot by slot / interval slot/Fancy lacing Lacing speed 8-48 slot Power

Servo Stator Coil Inserting Machine For ID Range Φ60-105mm Product Description Servo Coil Inserting Machine ID Range Φ60-105mm ISO/SGS Audit Application Suitable for stators used in single phase motors, three phase motors, compressor motors, starter motors, washing machine motors, air conditioners, and more. For optimal machine inquiry, please provide detailed drawings including: Stator lamination drawing Stator stack drawing Wire connection drawing Stator application details

Automatic Generator Motor Stator Coil Winding Inserting Machine The coil inserting process is generally the most time consuming element in the manufacture of a stator for an electric motor. It is equally important that the coils are well protected during coil insertion process. In order to offer our customers the perfect solutions, SMT well constructs its machines, even the tooling, which is manufactured to an extremely high standard and well polished and treated to give

Automatic Induction Motor Stator Coil Winding Insertion Machine SMT - K90 This stator coil inserting machine is used to insert coil and wedge into stator slots. The whole insertion process only takes 20 seconds. Machine is very easy to operate and the mantainance is simple. It can increase the productivity and save labor cost. (1) Main Technical Information Model K90 Stator I.D. 20-100mm Stator O.D. ≤160mm Stack Height ≤120mm Tooling Travel ≤70mm Appropriate Wire Copper Wire

ISO Coil Inserting Machine Single Phase Induction Motor Stator With horizontal frame design, controlled by industrial programmable PLC. It is used for winding and wedge automatically inserting. It adopts AC servo motor driving system, AC frequency conversion speed regulation system, pneumatic system. It can achieve wedge length setting, feeding, cutting, forming and inserting into stator together with coil automatically. Coil inserting speed can be set at different section.

Fan Motor Stator Coil Inserting Machine 60-150 mm Stator ID ISO / SGS Audit Application: It is suitable for stators applicated in single phase motor, three phase motor, compressor motor, starter motor, washing machine motor, air condiction ect. Information needed for stator winding inserting machine inquiry It will be better if customer could send us detailed drawing including below information. 1. Stator lamination drawing 2. Stator stack drawing 3. Wire connection drawing 4

Auto Stator Loop Coil Inserting Machine CU / AL Compatible Wire 1. With horizontal frame design, controlled by industrial programmable PLC, the machine is used for winding and wedge automatically inserting. 2. It adopts AC servo motor driving system, AC frequency conversion speed regulation system, pneumatic system. 3. It can achieve wedge length setting, feeding, cutting, forming and inserted into stator together with coil automatically. (1) Main Technical Features Model SMT

SMT - DR650 Electric Motor Winding Machine 2.2Kw ISO9001 / SGS